1 WEEK PRIOR INSTALLATION

• Painting – all painting should be completed and cured to reduce damage during installation.
• Skirting boards – should be painted to the subfloor to prevent exposure when flooring is replaced.
• Door clearances – check if doors must be cut or planed to clear new flooring height.
• Subfloor - ensure levelling compounds have cured and acoustic problems are fixed prior to flooring installation.
• Wiring and pipes – please advise were wiring, gas and water pipes are located to avoid damage during installation.  All wiring must be laid according to the Australian Safety Standards by a qualified technician.
• Underfloor heating – advise us if you have underfloor heating to ensure correct underlay is used.

1 DAY PRIOR INSTALLATION

• Access – arrange parking, access and lifts for day of installation
• Subfloors – ensure all debris is removed and subfloor is vacuumed ready for installation.
• Existing Carpet – existing carpet must be vacuumed prior to take up and removal by our installers.
• If you are doing take up – ensure no damage is made to the subfloor (e.g. removing of smoothedge may break concrete which will need to be repaired and cured before installation).
• Organise for professional movers to move Grand Pianos and Billiard Tables.  
• Furniture – areas must be cleared of furniture unless previously arranged to be moved by our installers.
• All furniture must be emptied of all contents.
• Beds must be stipped and disassembled if they require removing from the room.
• Remove all breakables, antiques and valuables from installation areas.
• Disconnect all electrical devices (e.g. TV, stereo system, computers etc).
• You will require to direct our installers when returning furniture.
• Our installers are not responsible to move furniture up or down stairs.

INSTALLATION DAY

• Electricity – needs to be available on site.
• Parking & Access – close parking is necessary in addition to safe entry to carry materials. 
• Clear Areas – installation area must be clear of other tradesmen, children and animals to ensure everyone’s safety.
• Fire & Securtiy Alarms  – smoke detectors must be covered and alarms disarmed.
• Underfloor heating – ensure heating is disconnected and reconnected after installation by a qualified electrician.